[Healeys] Sway Bar #2

Bob Spidell bspidell at comcast.net
Sun Feb 21 15:44:23 MST 2010


If you're asking about the end link bushings, tighten the nuts until the bushings are flattened to the diameter of the 
flat washers (or a bit less).


Bob



Eric (Rick) Wilkins wrote:
> It's probably best to settle the car before torquing down the brackets. 
> There's no "adjustment", you just need to tighten the brackets flat to 
> the frame.
> 
> Wilko
> 
> On Feb 21, 2010, at 12:26 PM, philritten at aol.com wrote:
> 
>> I've replaced all of the bushings on my sway bar and remounted it. I 
>> have two
>> questions
>>
>> 1) Do I need to put the wheels back on the ground (or on ramps) before 
>> doing
>> the final tightening? The car is currently on jack stands
>>
>> 2) How much should I tighten the bushings?
>>
>> Thanks all
>>
>> Phil



-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************


More information about the Healeys mailing list