[Healeys] will these fit 2" manifolds

[I Erbs]

well that's enough for me to pass,
thanks

On Tue, Feb 16, 2010 at 9:03 PM, <healeyguy at aol.com> wrote:

> Ira
> The carbs pictured are supposed to mounted vertically.  The Healey carbs
> will be mounted at an angle just like your HD6's. You will need a set of
> angled float bowls to start.  You'll have to figure out the linkage and use
> a 2" maniflold.
> Aloha
> Perry
>
>
>
>
>
>
> -----Original Message-----
> From: I Erbs <eyera3 at gmail.com>
> To: healey help <healeys at autox.team.net>
> Sent: Tue, Feb 16, 2010 6:44 pm
> Subject: [Healeys] will these fit 2" manifolds
>
>
> *http://tinyurl.com/yk8xepy*
> what else is needed to make these work? I want to upgrade my HD6s on my
> BT7.
> I can get the correct manifold
> thanks
> --
> I Erbs
> Portland, OR
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeyguy at aol.com
>
> http://www.team.net/archive
>



-- 
I Erbs
Portland, OR