[Healeys] Trafficator

Oudesluys coudesluijs at chello.nl
Mon Feb 1 13:55:35 MST 2010


Mark,
Can't you build up using black coloured epoxy and dress it to its 
original shape? Epoxy will adhere to bakelite very well.
I have used the method in the past with succes, although they were 
other, radio, items.
Kees Oudesluijs
NL

Mark Schneider schreef:
> Listers,
>
> I am seeking a source for replacement of a trafficator component.  The 
> item in question is the "center switch plate".  I may have the part 
> name incorrect but it is the black bakelite disc in the center of the 
> trafficator assembly which serves to retain the signalling lever 
> either left or right until the wheel is again returned to the center.  
> At the center of the bakelite disc is a small "v" which serves to 
> retain the signal requested until the turn is completed  The top edges 
> of the "V" have become heavily worn and the replacing the whole disc 
> would be the best fixl if a source of them can be found.  Thank you.
>
> Marks 3
> '66 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs at chello.nl
>
> http://www.team.net/archive
> ------------------------------------------------------------------------
>
>
> Geen virus gevonden in het binnenkomende-bericht.
> Gecontroleerd door AVG - www.avg.com 
> Versie: 9.0.733 / Virusdatabase: 271.1.1/2661 - datum van uitgifte: 02/01/10 08:35:00


More information about the Healeys mailing list