[Healeys] Part question

[Rich Chrysler]

Any bushings I've bought over the last few years have been solid, not split.
I suppose a split bushing could be installed over the rod and into the
eyelet without any dismantling of the rod assembly, but I fit the new solid
bushing as things are going together and have never found the need to
replace one unless a total restoration is under way. The originals seem to
last almost forever unless they've been torched or covered in paint.

Rich

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of john spaur
Sent: Wednesday, December 22, 2010 12:06 PM
To: healeys at autox.team.net
Subject: Re: [Healeys] Part question

Hi David,

Have you had a chance to check on this?

John

At 09:14 AM 12/20/2010 -0800, john spaur wrote:
>Hi David,
>
>Recently I purchased a bushing for the hand brake rod. The bushing 
>mounts in an eye on the axle housing and is part number 1B5329. The 
>bushing is split. Why is it split, and is it available unsplit?
>
>Thank you,
>John Spaur
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net