[Healeys] just wondering

[David Nock]

I have been running .060 over pistons in my car from a rebuild 17  
years ago over 70,000 miles and no problems.




David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Dec 2, 2010, at 9:56 AM, I Erbs wrote:

> My BT7 engine is bored 40 over. I see on ahead4healeys' site that  
> they have
> .60 over piston and ring sets.
> I have always feared what would happen if I ever had to rebuild my  
> engine
> again?
> So the question is can I use .60 over pistons safely in my 29D street
> engine, if need be?
> With around 30K on the engine, I hope this will not be an issue  
> during my
> lifetime, but just in case......
> Thanks
> -- 
> Ira Erbs
> DIGS-4 SOLUTIONS
> IT CONSULTANTS
> Portland, OR
>       _______ Austin Healey 3000 _______
>      (______ \____1960 BT7____/_______)
>          (_________________________)
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> healeydoc at sbcglobal.net