[Healeys] Tail light bullets

[Bob Spidell]

The ones on our (mostly) original BN2 were bent over.  Exposed wire was just long enough to be bent back and almost 
reach the base of the connector.

bs


On 12/1/2010 4:38 PM, I Erbs wrote:
> Tail light wire bullets. Are the wires soldered on the end or bent over.
> Memory says bent. If bent how long should exposed wire be?
> Ira Erbs
> Digs 4 Solutions
> Computer Consultants
> Portland, OR
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************