[Healeys] intermittent OD

[warthodson at aol.com]

My BJ7/8 parts book shows an adjustment screw (#27H2413) & locknut (#FNN204).
It also shows rubber stop (#17H5811). Both seem to serve the same purpose. My
BJ8 overdrive came with the adjustment screw & locknut.
Gary Hodson





-----Original Message-----
From: Jim LeBlanc  jim_leblanc at yahoo.com

I recall using a brass screw without putting threads in the hole. Some
ecommend a nylon screw. As the plunger operates on magnetic pull, one does
ant to avoid steel. (I have never verified the effect of magnetism and
voided the possible research effort).

 recall putting a nut on both sides of the hole giving adjustment to plunger
all.

rom: Jwhlyadv at aol.com <Jwhlyadv at aol.com>
ubject: Re: [Healeys] intermittent OD
o: rantal243 at yahoo.com, healeys at autox.team.net
ate: Friday, August 27, 2010, 2:57 PM

he old timers like Malcom Terry taught us to tap the hole and run a
achine screw up through the bottom to act as a stop. Worked for me!
Jim Werner


=