[Healeys] How to remove Master Cylinder Plunger? '60 BT7

[Oudesluys]

Probably a rim of crud formed during the years. Try a plastic or wooden 
scraper to get rid of most dirt and put an airline on the cylinder to 
eject the plunger. Be careful though, it may shoot out like a bullet. Do 
not worry about the seal, you have to renew that anyway.
Kees Oudesluijs
NL


grantlyon at myway.com wrote:
> Rebuilding my clutch master cylinder.
> Removed MC.
> Have disassembled push rod with dished washer after circlip removal.
> It is not obvious to me what is holding the plunger assy in the cylinder.
> The plunger is free to move down into the cylinder bore, but stops at the
> top/end of bore well before the circlip slot.
> How to "remove plunger assembly complete" per workshop page E.6 ?
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
> ------------------------------------------------------------------------
>
>
> Geen virus gevonden in het binnenkomende-bericht.
> Gecontroleerd door AVG - www.avg.com 
> Versie: 9.0.851 / Virusdatabase: 271.1.1/3069 - datum van uitgifte: 08/13/10 20:34:00

[demime 1.01d removed an attachment of type text/x-vcard which had a name of coudesluijs.vcf]