[Healeys] "D" shaped washers for the fuel tank strap

[Ron Ray]

Olin,
 
I bought metal washers with rubber seals laminated to one side at a local
hardware store and simply trimmed them to achieve the fit.  My hope is that
the rubber aspect will seal out water, but I know this may be overkill
considering the location of the holes through the bodywork.
 
   Ron
 
 
 
-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Olin Brimberry
Sent: Saturday, August 07, 2010 5:01 PM
To: healeys at autox.team.net
Subject: [Healeys] "D" shaped washers for the fuel tank strap
 
Does anyone have an extra set of 2 of these washers.  I took my tank  
out and when putting the straps back on, I misplaced the washers.   
These are the 2 that are D shaped so that it will fit against the  
flange to the rear shoud.
 
Thanks,
 
Olin Brimberry
Raleigh, NC