[Healeys] Gearbox to engine dowel bolts position?

[Tadeusz Malkiewicz]

Hello Bob, Josef,

What end are you looking from?

When I look at the engine from the gearbox side, I have holes milled at 1 &
7 o'clock.

Best, tadek

-----Original Message-----
From: Bob Spidell [mailto:bspidell at comcast.net] 
Sent: Wednesday, August 04, 2010 5:22 PM
To: Josef.Eckert at t-systems.com
Cc: tadeusz.malkiewicz at plusnet.pl; Healeys at autox.team.net
Subject: Re: [Healeys] Gearbox to engine dowel bolts position?

On our BN2, there are milled recesses for bolt heads at the 1 and 7 
o'clock position--I figured the dowel bolts went there.

If not, why do only these two positions have milled recesses?

bs


Josef.Eckert at t-systems.com wrote:
> Hello Tadek,
> They go at 5 and 11 o clock position.
>
> Josef Eckert
> Konigswinter/Germany
>
> Betreff: [Healeys] Gearbox to engine dowel bolts position?
>
> Hello,
>
> There are 2 dowel bolts to mate the gearbox to the engine - where do they
> go??..
>
> Many thanks,
>
>   


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************