[Healeys] BJ8 window crank

[Tom Felts]

Had mine for 30 years and it has always done that.  Put new panels on a few years ago and didn't take long before they did it also.


---- Richard Kahn <tahoehealey at hotmail.com> wrote: 

=============
I am having trouble with the window cranks on my BJ8 pushing the interior door
panels inward, causing it to bow away from the bottom portion. This is
occurring on both sides. I have just replace the panels due to the previous
panels doing the same thing. The square shaft has two sets of holes and I am
using the ones further inboard ( towards the seats). Can the whole window
mechanism be moved in (towards the seats) 1/4 or more using washers or is
there another way of adjusting the position of the window? I am using 1/8
board and very thin foam.
Thanks for any help.
Rich Kahn

_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL
:en-US:WM_HMP:042010_3
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/tomfelts@windstream.net