[Healeys] under dash insulation pad

[Rich C]

Ira,

The insulation pieces are heavy "felt paper" or tar paper pieces that glue 
to the inside surface of the upper bulkhead where all the wiring, hoses and 
grommets come through. It is above and forward of the heater assembly. This 
really needs to be installed first before a car commences to be assembled.

Rich

--------------------------------------------------
From: "I Erbs" <eyera3 at gmail.com>
Sent: Thursday, April 22, 2010 5:52 PM
To: "healey help" <healeys at autox.team.net>
Subject: [Healeys] under dash insulation pad

> found on page 31 Nocks hard to find parts.
> May be a simple question but here goes.....
> does this fit behind or above the heater assembly?
> Hard to tell just by looking/ The heater is just not coming out. The screw
> heads wii not release. have tried heat, anti-seize, hammer screw driver 
> and
> brute force. Do not want to rip off screw heads.
> Thanks, and Hi John, got your message
>
> -- 
> I Erbs
> Portland, OR
>  _______                                  _______
>    (______ \____1960 BT7____/ _______)
>        (_________________________)
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net

[demime 1.01d removed an attachment of type image/jpeg which had a name of jul409 033.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of jul409 032.jpg]