[Healeys] Blown exhaust gaskets redux
Bob Spidell
bspidell at comcast.net
Mon Apr 19 07:30:13 MDT 2010
That's the problem: the Healey takes a stud with fine threads on both
ends (else I could get replacements at the local hardware store).
bs
Richard Ewald wrote:
> Look at the Doorman catalog online. They do make studs with the
> coarse threads on the long end. You might have to order a whole box,
> but it would solve the problem
>
> On Mon, Apr 19, 2010 at 5:43 AM, Bob Spidell <bspidell at comcast.net
> <mailto:bspidell at comcast.net>> wrote:
>
> All the studs I saw had coarse threads on the 'short' end--the one
> that goes into the manifold. But, yes, theoretically you could
> do that.
>
> Kinda wonder why Austin used fine/fine.
>
> bs
>
>
>
> Richard Ewald wrote:
>
> Other than the fact you would have to buy a handful of coarse
> nuts, is there any reason you could not use coarse / fine studs?
> Rick
>
> >>'Standard' studs--the kind you can get at the hardware
> store--are coarse thread on one end and fine on the other. I
> need fine on both ends.
>
>
>
>
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell at comcast.net
> <mailto:bspidell at comcast.net>
>
> *******************************************************************
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell at comcast.net
*******************************************************************
More information about the Healeys
mailing list