[Healeys] Fw: Windshield Install on BT7

[Rich C]

Ron,

They originally used thin (maybe 1/16") aluminum strips about 1" wide by 5"
long that had about 1/2" holes aligned for the lower two bolt holes. These are
listed in the Spare Parts List as part number 14B2630, Plate, pillar packing,
2 required,  but are not illustrated in the list. Depending on the fitting up
of the windscreen assembly to the car, I've seen anywhere from none required
up to 3 needed per side.

Rich




From: Ron Ray
Sent: Friday, April 02, 2010 9:41 AM
To: 'Rich C' ; 'Mark LaPierre' ; healeys at Autox.Team.Net
Subject: RE: [Healeys] Windshield Install on BT7


Rich,



What would you suggest for use as the "packing shims"?



Thanks,

   Ron