[Healeys] Clutch return spring BN2

[Rich C]

Thomas,

There is a small bracket that is about 1 1/2" long, with two holes, the 
larger one for its mounting bolt, and the smaller hole for the return 
spring. This bracket is fitted to the bell housing mounting bolt that is 
positioned at about 7 o'clock (lower left area).

Rich

--------------------------------------------------
From: "T+ B Willig" <willig at wtnet.de>
Sent: Friday, April 02, 2010 9:11 AM
To: <Healeys at autox.team.net>
Subject: [Healeys] Clutch return spring BN2

> Hello,
>
>
>
> the clutch return spring of the BN1/2 is attached to the clutch lever on 
> one
> side and to ???? on the other side.
>
>
>
> Please advise
>
>
>
> Regards
>
>
>
> Thomas Willig
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net