[Healeys] Lucas Switch

Curt/Nancy Arndt cnaarndt at gmail.com
Tue Sep 15 18:59:49 MDT 2009


Doug,

Soak in warm distilled white vinegar, which is about 5 to 6 % acidity.  This
will gently take take the rust off.  You can clean with water just use WD-40
to displace any water and lubricate the inside when finished.

I've cleaned a similar switch using this technique.

Cheers,

Curt

On Tue, Sep 15, 2009 at 4:52 PM, dwflagg <dwflagg at juno.com> wrote:

> I have a Lucas push pull switch with surface rust on the case. Is there
> anything I can soak it in to remove the rust without damaging the switch.
> Also, the knob is not secured in place with the spring loaded button. It
> is on a slotted shaft, but I'm am not sure how to remove it. Any
> thoughts? Thanks.
>
> Doug
> ____________________________________________________________
> Best Weight Loss Program - Click Here!
>
> http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTFoYbGmbCfgYrczlNDbzneoISrMoK6Pwu9Xph0yoaIQxpmIkMF2Qw/
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as cnaarndt at gmail.com
>
> http://www.team.net/archive


More information about the Healeys mailing list