[Healeys] ezebleeder

[Rich C]

Moss lists the Ezibleed kit as their part number 386-860 for $57.95.

This is all I've used for years and it always works extremely well. One tip, 
instead of just taking normal tire pressure of 25 to 35 PSI from a spare 
tire, I reduce the pressure to about 12 PSI. That way, if there's a leak you 
won't end up with all sorts of aeration through the system and the entire 
proces of bleeding the system will be gentler and much less mess.

Rich Chrysler

----- Original Message ----- 
From: "Don Day" <fsufan1952 at yahoo.com>
To: <healeys at autox.team.net>
Sent: Saturday, September 05, 2009 2:42 PM
Subject: [Healeys] ezebleeder


> Does anyone have a good source for a ezebleeder system? The one I am 
> looking for is the one that you use your spare tire for pressure.I used 
> one a  while ago and found it easy to use.Does anyone have any other one 
> man system suggestions? i think I got it from Moss a long time ago.I just 
> replaced all my lines with new stainless tubes,along with new master 
> cylinders and had my power booster rebuilt.I going with synthetic.
>
>  Thanks Don