[Healeys] Angle Drive BJ 8

[Oudesluys]

Good advise, although Smiths in the old days advised lithium grease used 
sparingly. I have always used EP90 copiously as I did not know any 
better untill recently. Luckily I never had any mishaps on various old 
Brits.
Graphite powder is a good lubricant for lots of applications, many of 
which are usely serviced with either grease or oil, e.g.: the sliding 
driving gear of the starter motor, the splines of the primary shaft of 
the gearbox on which the clutch plate slides, all locks etc. However 
before you apply the graphite powder make sure everything is cleaned 
using methilated spirits, otherwise it will become a mess.
Kees Oudesluijs
NL


63ahbj7 schreef:
> Michael's verbage is right-on, Price (he has FASTER keyboard<G>)!!
>
> But a word of caution here !!
>
> << of operation due to lack of lubrication. >>
>
> And if this IS the situation disassemble, CLEAN and assemble using
> ONLY graphite !!!  Local locksmith will have.  NOTHING else !!
> Do same for cable core.
>
> Ed
> Please visit MY site at:
> www.justbrits.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs at chello.nl
>
> http://www.team.net/archive
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.409 / Virus Database: 270.13.78/2347 - Release Date: 09/05/09 05:51:00