[Healeys] Can I Lock Up The Engine? (BJ8).

richard mayor mayorrichard at hotmail.com
Tue Sep 1 19:08:52 MDT 2009


John,  Put the tranny in first. Have someone in the car with their foot on the
brakes. Tighten the nut to at least 95 ft lbs of torque. You cannot do it with
an open end wrench. You need a socket on it. That means you have to undo some
motor mount bolts and jack the engine up high enough to get at it.  A loose
crankshaft nut will allow the damper to vibrate so much that it will fret the
end of your crankshaft. That may already have happened. However, if your are
not racing it, then, no worries.  Richard

> Date: Tue, 1 Sep 2009 11:37:35 +0100
> To: glwilkie at bigpond.com
> From: ah at jharper.demon.co.uk
> CC: Healeys at autox.team.net
> Subject: Re: [Healeys] Can I Lock Up The Engine? (BJ8).
>
> Graham
>
> The recommended method to tighten the nut is not to lock up the engine
> but to rely on the friction and inertia of the internal parts. There are
> official service tools that are heavy and fit over the nut like a normal
> ring spanner but at the other end they have a large flat area than is to
> be hit with a hammer.
>
> The service tool for the 100 is 18G96 - Starting Nut Spanner - and I am
> pretty certain that this is the same for a BJ8.
>
> I don't have one of these myself but I do have a very heavy old spanner
> that I keep for this purpose. Even with an engine out of the car and not
> locked in any way a good whack hardly turns the engine at all but the
> nut comes up nice and tight.
>
> Regards
>
> >
> >The large cranknut in front of the damper and pulley on my 29K series
> >engine is a bit loose and requires tightening. (The lock tab on the
> >washer beneath the cranknut hadn't been properly bent over the flat on
> >the cranknut). With the radiator and fan removed I can get onto the
> >cranknut with a 1-11/16" open ender, but the trouble is that the engine
> >turns when I try to nip it up, even with the car in gear.
> >
> >Would somebody please tell me if there is any way I can safely lock up
> >the engine, to enable me to properly tighten the cranknut?
> --
> John Harper
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as mayorrichard at hotmail.com
>
> http://www.team.net/archive

_________________________________________________________________
Hotmail. is up to 70% faster. Now good news travels really fast.
http://windowslive.com/online/hotmail?ocid=PID23391::T:WLMTAGL:ON:WL:en-US:WM
_HYGN_faster:082009


More information about the Healeys mailing list