[Healeys] Lucas SFT 576

[Norman Nock]

I checked the thread on a SFT 576 and as Michael Salter said it's 5/8  26 TPI
British Standard Brass ... Norman Nock

--- On Sun, 10/25/09, Michael Salter <msalter at precisionsportscar.com> wrote:

From: Michael Salter <msalter at precisionsportscar.com>
Subject: Re: [Healeys] Lucas SFT 576
To: pennell at cox.net, "'dwflagg'" <dwflagg at juno.com>, healeys at autox.team.net
Date: Sunday, October 25, 2009, 5:44 AM

I think you will find that it is actually 26 t.p.i. being BSC British
Standard Cycle Thread
http://homepages.tesco.net/~A10bsa/bscbot.htm

Michael Salter
http://www.netbug.net/blogmichael/?p=445


-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of pennell at cox.net
Sent: Saturday, October 24, 2009 9:59 PM
To: dwflagg; healeys at autox.team.net
Subject: Re: [Healeys] Lucas SFT 576

Hi Dougie,

I am missing a nut for the same light.  A while back I was reasearching it
and I seem to recall I found it was 5/8 by 27 tpi.  Somewhere I was told
that a number of brit motorcycles used the 27 tpi.  I never found a nut.

Keith

---- dwflagg <dwflagg at juno.com> wrote:
> Does anyone know the thread size on the Lucas SFT 576 for the securing
> nut.? TIA.
>
> Doug
_______________________________________________
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as sjnnock at sbcglobal.net

http://www.team.net/archive