[Healeys] dash lights

[Rich C]

Rick,

I took one of these new replacement sockets into an auto pars store, told 
them they were for 12v dash illumination lights and they immediately 
supplied some modern GM bulbs that simply push into the new sockets. These 
in turn will fit into your instruments and gauges on a BJ8 with no problem.
That said, I always replace the ones for Concours cars with the originals 
harvested from the original harness.

Rich Chrysler

----- Original Message ----- 
From: "rick thomas" <thomas3 at shaw.ca>
To: <healeys at autox.team.net>
Sent: Friday, October 09, 2009 10:04 PM
Subject: [Healeys] dash lights


> Hi  All
> am installing new wiring harness on BJ8.
> the new harness, behind the dash has recepicals for spade type lamps not 
> the
> screw in type
> does any one no what bulbs I should get . The signal light indicators are
> fairly small and I am concerned with heat ,but the recepticals are all the
> same size
>
> thanks as always
> Rick
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler at quickclic.net
>
> http://www.team.net/archive