[Healeys] Paint for various BN2 parts

[Tadeusz Malkiewicz]

Alan,

I have both, but was actually wondering about the RAL color code..

Also, concourse guidelines does not provide info on the below stuff ( I have
not checked the Anderson/Moment book though.)

-----Original Message-----
From: Alan Seigrist [mailto:healey.nut at gmail.com] 
Sent: Friday, October 02, 2009 1:57 PM
To: Tadeusz Malkiewicz; healeys at autox.team.net
Subject: Re: [Healeys] Paint for various BN2 parts

Tadek -

Seat slides and boot prop was zinc plated.  The accelerator should be
gloss black.  All the other stuff is gloss black.

You should get the Concourse guidelines and Gary Anderson's Book,
between the two most of this is covered, plus makes for good reading!

Alan

On 10/2/09, Tadeusz Malkiewicz <tadeusz.malkiewicz at plusnet.pl> wrote:
> Hello,
>
> This must have been taken a number of times before, but I have to ask:
>
> 1. What color is the gas pedal (mine was green)
> 2. what color are the seat rails
> 3. what color is the trunk support
> 4. What type of black is used on various parts like tank, fresh air inlet,
> seat pans, etc, etc?
>
> Best Regards,
>
> Tadek
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut at gmail.com
>
> http://www.team.net/archive
>


-- 
Alan

'52 A90
'53 BN1
'64 BJ8