[Healeys] BN1 carb questions

[Rich C]

Sarah,

Other ends of bracing straps to fit under brass centre bolt on float chamber 
lids.
Choke anchor strap to fasten under bolt heads for air cleaners on engine 
side of mounting flange.

Rich Chrysler

----- Original Message ----- 
From: "Carr&Edwards" <scvc70 at epix.net>
To: "Healey List" <healeys at autox.team.net>
Sent: Monday, November 16, 2009 5:01 PM
Subject: [Healeys] BN1 carb questions


> We're finally back on work on my BN1.  Since it's about a 2-hour drive to 
> look
> at the closest other one that we know of, I hope the list can come through
> again with the following:
>
> The carbs that were on my car when I bought it were (according to Jim 
> Taylor,
> when I sent them to him for rebuild) a mixture of Healey, MG, and 
> something
> else that I can't remember right now.  The air cleaners and an 
> as-yet-unknown
> number of other things were missing.  The Moss ("Manifolds - 100-4") and
> Workshop Manual drawings show two brackets that appear to fasten at one 
> end to
> the studs sticking up from the "ears" on the intake manifold--and at the 
> other
> end to _____?????  I've gone through all my photos of other cars and can't
> find anything that shows this detail.
>
> Also, I assume that the choke-cable bracket fastens to the back of the 
> carb
> flanges (DPO had it fastened to the front--no air cleaners,
> remember)--correct?
>
> As usual, TIA for your help!
> Sarah Carr
> BN1 in PA
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler at quickclic.net
>
> http://www.team.net/archive

[demime 1.01d removed an attachment of type image/jpeg which had a name of richardgordon02.jpg]