[Healeys] Overdrive Part 1

[Mark LaPierre]

 IMHO,   trany standing up and lowering the OD down on top is the way to go. 
The springs
shouldn't be an issue if you put the adapter plate on the OD unit first 
which encapsulates the springs.
For a pretty good deomonstration of this go to the U Tube University motors 
videos and look for
John Twists OD  install clip.  He also suggests to champher the pump cam to 
help with a nice smooth
install,           well sometimes.

Priceless.

Mark

 Roger Moment suggested laying the transmission on its
>> side as opposed to standing the transmission up and putting the OD
>> onto it or, as the manual suggests, standing the OD up and dropping
>> the trans onto it.  Sideways was much easier and if you have ever
>> had the experience with the springs, which want to drop onto the
>> floor when the OD is upside down, you understand the issue.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as lapierrem at sbcglobal.net
>
> http://www.team.net/archive