[Healeys] 100 Engine rebuild

[Awgertoo at aol.com]

I did what Curt suggests to my BN1 with the Smitty's bellhousing.  The  BJ8 
clutch is light and has geat action.
 
Best--Michael Oritt
-----------------------------------------------------------
In a message dated 11/4/2009 8:23:04 P.M. Eastern Standard Time,  
cnaarndt at gmail.com writes:

The best  bet for your BN2 is to use a BJ8 Flywheel which is much lighter 
than stock,  plus no messing around with lightening.  Doing this will also 
allow you  to use the better diaphragm clutch from the same.

I would do this with  my BN1 but the three speed bell housing will foul on 
the BJ8  setup.