[Healeys] Horn

[John Sims]

Go to the Technical page of my web site and scan down to the Gauge section
and you will see at the end of that section a link to Trafficator Repair.
This brings up a PDF which has excellent photos of what you should see. It
takes a while to load but you will be able to print it out and use it.

Dont ask me why I put it in that section, but I did.

I have and original AKD 1179A and the page does not read the same as mine.

John Sims, BN6
Aberdeen, NJ
 
http://www.healey6.com


-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Simon Lachlan
Sent: Sunday, May 24, 2009 5:10 PM
To: healeys at autox.team.net
Subject: [Healeys] Horn

One for the wise ones............
(I have a MkII BT7)
My horns aren't working. I have done a little digging...
With ignition on..There is no current at the horn push and there does not
appear to be any current in/at the top fuse which I believe only does the
horn.
I haven't looked much further except in the books as I'm waiting for
daylight.
Any suggestions?
And, does anyone have page N.22 from the manual AKD1179H that they could
email me? Page starts with the words "steering box. With an". Mine seems to
be missing from my pdf version and I can't stuff the paper manual into my
rather flimsy little scanner.
And, looking at the excellent pictures of the "trafficator" from that
excellent article, I don't see a spring which, in my horn, sits under the
brass plate which is under the plastic horn push. This being the plate which
completes the circuit and makes the horns sound off. Is my spring something
which a PO put in?
Simon.