[Healeys] wire wheel greasing

[Norman Nock]

Clean you hubs and the splines with a wire brush , put a good smear of disc
wheel bearing grease on the splines , the knock off clean the threads and put
some oil on the threads ...  The spokes at the hub end will show a little
dirty , so clean it off with a wire wheel cleaner ..  l have had cars that
owners didn't grease the hubs and we had to use a cutting torch to remove the
wire wheel because of the rust . 
More info in Healey Highlights May 1986 and page 72 in my Tech Talk book .. on
page 122 of my book is factory service bulletin about this subject           
      Norman Nockj

--- On Tue, 5/19/09, dgschwind at comcast.net <dgschwind at comcast.net> wrote:

From: dgschwind at comcast.net <dgschwind at comcast.net>
Subject: [Healeys] BJ8 wheel knock-off tightening
To: healeys at autox.team.net
Date: Tuesday, May 19, 2009, 3:58 PM