[Healeys] Headlight dipper switch - help!

Heal;ey bj7ah at acanac.net
Tue May 19 13:16:22 MDT 2009


I just soldered Mine about 5 years ago and is still working fine.

                     Bob    1963 BJ7

--------------------------------------------------
From: <CAWS52803 at aol.com>
Sent: Saturday, May 16, 2009 7:22 PM
To: <healeys at autox.team.net>
Subject: [Healeys] Headlight dipper switch - help!

> Recently the little (1") cap/button popped off it's bracket.  This is the
> dimmer switch that controls the high/low headlights on my Bugeye - same as 
> my
> BN4.  I cleaned it up and pushed it back on, but because of the spring, it
> just pops back off.  There is no apparent way to fastened it down.  Even 
> the
> Parts Manual doesn't show any method to secure the cap.  And looking at 
> the
> bracket, there is nothing that appears to be a switch to control the
> headlights.  It is just a solid piece with the 3 wires connected to the 
> underneath.
> Any guidance and/or explanation is greatly appreciated.
> Rudy Streng
> Lenoir, NC
> **************Recession-proof vacation ideas.  Find free things to do in
> the U.S.
> (http://travel.aol.com/travel-ideas/domestic/national-tourism-week?ncid=emlcntustrav00000002)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as bj7ah at acanac.net
>
> http://www.team.net/archive 


More information about the Healeys mailing list