[Healeys] Bleeding Clutch Line

Healey Bruce healeybruce at roadrunner.com
Fri May 8 13:21:11 MDT 2009


Phil, I would recommend installing the clutch bleeder extension from Mr. 
Finespanner with a Speed Bleeder on the end.  Makes the job so much easier.

Bruce Steele
1960 BN7
Brea, CA
----- Original Message ----- 
From: <PhilRitten at aol.com>
To: <healeys at autox.team.net>
Sent: Wednesday, May 06, 2009 8:23 PM
Subject: [Healeys] Bleeding Clutch Line


>I was attempting to bleed the clutch on my '58 BN4, and accidentally
> twisted off the end of the pipe (last inch) underneath the car. Noting 
> that
> there isn't a bleed screw anywhere, has anyone else cut the pipe back a
> little
> ways and installed a short piece of pipe with a bleed screw on it? Also, 
> is
> it  possible to put in a section of rubber fuel line to bridge the gap?
>
> Thanks
> Phil
> **************Big savings on Dellbs most popular laptops. Now starting at
> $449!
> (http://pr.atwola.com/promoclk/100126575x1221827510x1201399090/aol?redir=http
> :%2F%2Fad.doubleclick.net%2Fclk%3B214663377%3B36502382%3Bh)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeybruce at roadrunner.com
>
> http://www.team.net/archive 


More information about the Healeys mailing list