[Healeys] BJ7 Brake M/C Bore Size?

[Peter Linn]

100s do (at least BN1) - I've just had cause to measure mine plus a spare

Cheers

Peter Linn
Brisbane Oz
----- Original Message ----- 
From: "HealeyRick" <healeyrick at yahoo.com>
To: <healeys at autox.team.net>; "Rich C" <richchrysler at quickclic.net>
Sent: Friday, May 08, 2009 8:06 AM
Subject: Re: [Healeys] BJ7 Brake M/C Bore Size?


> Did one of the Healeys have a 3/4" bore?
> 
> Rick
> 
> --- On Thu, 5/7/09, Rich C <richchrysler at quickclic.net> wrote:
> From: Rich C <richchrysler at quickclic.net>
> Subject: Re: [Healeys] BJ7 Brake M/C Bore Size?
> To: healeyrick at yahoo.com, healeys at autox.team.net
> Date: Thursday, May 7, 2009, 5:52 PM
> 
> Brake master cylinder bore for the standard non servo BJ7 is 5/8". It's
> 
> idential to the clutch master cylinder.
> 
> Rich Chrysler
> 
> ----- Original Message ----- 
> From: "HealeyRick" <healeyrick at yahoo.com>
> To: <healeys at autox.team.net>
> Sent: Thursday, May 07, 2009 5:30 PM
> Subject: [Healeys] BJ7 Brake M/C Bore Size?
> 
> 
>> Anyone know the bore size on the BJ7 brake master-cylinder?
>>
>> Thanks in advance,
>> Rick
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> You are subscribed as richchrysler at quickclic.net
>>
>> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> You are subscribed as greylinn at ozemail.com.au
> 
> http://www.team.net/archive