[Healeys] BJ7 Brake M/C Bore Size?

[Alan Seigrist]

Rick -

The 3/4" bore MC is used as the Brake MC on servo assisted cars, which
includes BJ8s and a small handful of BJ7s, MkII BT7s and BN7s  that
had the servo assist option.

Alan

On 5/8/09, HealeyRick <healeyrick at yahoo.com> wrote:
> Did one of the Healeys have a 3/4" bore?
>
> Rick
>
> --- On Thu, 5/7/09, Rich C <richchrysler at quickclic.net> wrote:
> From: Rich C <richchrysler at quickclic.net>
> Subject: Re: [Healeys] BJ7 Brake M/C Bore Size?
> To: healeyrick at yahoo.com, healeys at autox.team.net
> Date: Thursday, May 7, 2009, 5:52 PM
>
> Brake master cylinder bore for the standard non servo BJ7 is 5/8". It's
>
> idential to the clutch master cylinder.
>
> Rich Chrysler
>
> ----- Original Message -----
> From: "HealeyRick" <healeyrick at yahoo.com>
> To: <healeys at autox.team.net>
> Sent: Thursday, May 07, 2009 5:30 PM
> Subject: [Healeys] BJ7 Brake M/C Bore Size?
>
>
>> Anyone know the bore size on the BJ7 brake master-cylinder?
>>
>> Thanks in advance,
>> Rick
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> You are subscribed as richchrysler at quickclic.net
>>
>> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut at gmail.com
>
> http://www.team.net/archive
>

-- 
Sent from my mobile device

Alan

'52 A90
'53 BN1
'64 BJ8