[Healeys] clutch supplier info

[bighealey at charter.net]

My only comment is to make sure the thickness of the replacement throwout carbon is the same size as the one pulled.  There are some thin ones floating about and look good all shiney and new.  But will not work.  Save yourself the trouble of pulling the thing back out by comparing side by side BEFORE commiting to reinstalling the anchor.

---- ahy3000 at comcast.net wrote: 
> I recently completed a clutch / pressure plate / throwout bearing replacement with Moss parts and a lot of advice from this list. Everything is working great and we are enjoying driving about for the first time in many months. 
> 
> 
> Burt Weiner 
> '63 BJ7 
> HBJ7L/23582 
> ahy3000 at comcast.net 
> 
> ----- Original Message ----- 
> From: "Don Day" <fsufan1952 at yahoo.com> 
> To: "healey list" <healeys at autox.team.net> 
> Sent: Wednesday, May 6, 2009 10:49:17 AM GMT -05:00 US/Canada Eastern 
> Subject: [Healeys] clutch supplier info 
> 
> Hi List 
> Does anyone have any guidance, past experience,suggestions on buying a clutch/pressure plate/release bearing for a 67BJ-8? Dennis Welch?Moss? A/H Spares? Should I stay away from anyone? 
> Any Help would be appreciated 
> Don 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> You are subscribed as bighealey at charter.net
> 
> http://www.team.net/archive