[Healeys] carb coupling shaft

[Alan Seigrist]

Brad -

On the BJ8 you have to install the carbs and shaft as one unit as the
coupling shaft slots in the thottle shaft arms.

Alan

On 5/2/09, Attean Lake Lodge <info at atteanlodge.com> wrote:
> Could someone tell me how to install the carb coupling shaft after the carbs
> have already been installed?? Do I have to take them off and install as one
> unit or can I slide the fork on the front carb back enough to get the shaft
> in
> place. Per usual any help will be much appreciated.
>
> Brad Holden
> 67 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut at gmail.com
>
> http://www.team.net/archive
>

-- 
Sent from my mobile device

Alan

'52 A90
'53 BN1
'64 BJ8