[Healeys] Instrument panel refinishing
Warthodson at aol.com
Warthodson at aol.com
Tue Mar 31 06:40:24 MST 2009
I tried many different chemicals to soften/dissolve /strip the finish &
never found anything that would work. However, a heat gun did soften the finish &
allow me to scrape it off without removing the veneer.
Gary Hodson
In a message dated 3/30/2009 6:59:55 P.M. Central Daylight Time,
ahbn6 at verizon.net writes:
have
found nothing that will soften the finish so that it can be scraped off and
at
this point I am afraid to start sanding since it would be difficult to tell
when the veneer is exposed.
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100126575x1220439616x1201372437/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID
%3D62%26bcd%3DfebemailfooterNO62)
More information about the Healeys
mailing list