[Healeys] Squealy Healey (Clutch)

[Alan Seigrist]

Jack -

If either the bearing or bearing mate-ring on the clutch cover comes
loose, you can get this symptom.  If you step on the clutch a little,
the noise goes away, right?

If you start hearing a little rolling/clinking/tumbling noise coming
from the clutch when your foot is off the clutch, this is your
problem.


On 3/25/09, Jack Newton <jmnewt at comcast.net> wrote:
> My BN-2  has been on the road infrequently since a complete restoration over
> a
> year ago and it continues to have a loud and annoying clutch squeal noise
> any
> time the clutch is engaged under load but no squeal when it's engaged in
> neutral (no load)
> The usual adjustment of the linkage both in and out does not seem to
> influence
> the noise.  I have some suspicion about the release bearing being correct.
> Clutch and disc were also new.  Flywheel was turned and lightened.  Any
> suggestions from the experts???
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut at gmail.com
>
> http://www.team.net/archive
>

-- 
Sent from my mobile device

Alan

'52 A90
'53 BN1
'64 BJ8