[Healeys] Bodywork Advise on "Oil Canning"

caddi5 at comcast.net caddi5 at comcast.net
Sun Jun 28 05:06:31 MDT 2009


Use a "shrinking disc" after hammering out the dent......works great! By no
means fill with bondo..................Mitch
----- Original Message -----
From: "Greg Lemon" <glemon at neb.rr.com>
To: "Patrick and Caroline Quinn" <p_cquinn at tpg.com.au>, "Rich C"
<richchrysler at quickclic.net>, "Mark LaPierre" <lapierrem at sbcglobal.net>,
healeys at autox.team.net
Sent: Saturday, June 27, 2009 11:07:13 AM GMT -05:00 US/Canada Eastern
Subject: Re: [Healeys] Bodywork Advise on "Oil Canning"

I too attended a body shop class last year, and agree with Rich and Patrick,
don't cover up with filler, body stress or something its it and it pops back
out.

Not sure if I would recommend this but just passing it on, the shop class I
took was aimed more at production repair work of modern crunched vehicles
and not high quality restorations. B Anyway, the instructor and a subsequennt
body man I have worked with and made freind with liked to use the pick or
pointy end of the body shop hammer on such areas, dimpling the bejeezus out
of, or I guess into the surface and in effect pulling out the slack. B Like
Patrick I took the class with a bunch of classic car do it yourself types,
we were pretty much aghast at that whole idea of dimpling up smooth sheet
metal and covering it withh filler, but it is apparently not unncommon in
the industry.

That being said I would recommend doing it the right way with heat and
shrinking tools, I don't have the skills to do that (don't think, haven'
really tried) and when I had the same problem on my TR250 door took it to a
shop to have that particular problem fixerd, although I am doing most all of
the rest of the bodywork myself, .didn't cost too much either.

Greg Lemon
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as caddi5 at comcast.net

http://www.team.net/archive


More information about the Healeys mailing list