[Healeys] Engines and gear boxes
Mark LaPierre
lapierrem at sbcglobal.net
Sat Jun 27 00:41:55 MDT 2009
Yes, however swapping individual gears back and forth is a hole different
story.
Also the 3000 version is more desirable because it has been known that the
main shaft
retainer clip can come off and create some issues in the earlier boxes.
The teeth were
cut in the opposite direction to help eliminate that problem.
However the earlier 28% overdrive is the way to go rather than the 22% from
the 3000 and
they are also interchangeable as a whole.
Mark
----- Original Message -----
From: "Bernard Cristalli" <bcrist at club-internet.fr>
To: "Healey List" <healeys at autox.team.net>
Sent: Friday, June 26, 2009 3:16 PM
Subject: [Healeys] Engines and gear boxes
> Hi listers,
>
> Is it possible to switch a gear box from a 100-6 to a 3000 or vice-versa?
> In other words, are all the 6 cylinders engines able to accept
> indifferently earlier or later gear boxes?
>
> Thanx
> Bernard
> BT7 & BN4
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as lapierrem at sbcglobal.net
>
> http://www.team.net/archive
More information about the Healeys
mailing list