[Healeys] Bodywork Advise on "Oil Canning"

Mark LaPierre lapierrem at sbcglobal.net
Fri Jun 26 18:27:01 MDT 2009


One of my front fenders has an "oil canning" dent that needs some attention.
When
popped out it will eventually pop back in.  This is in the largest field area
of the fender and is obviously very noticeable.
This was created by either too much abrasive blasting or too much heat when
the lower panel was welded on.

Can this be filled in with a good firm body filler and expected not to pop out
at sometime
down the line.


Mark


More information about the Healeys mailing list