[Healeys] BN6 Tail Lights

[John Sims]

Probably the brake light pressure switch. I have my stock brake lights wired
to it but have my third brake light and converted reflectors to brake lights
wired to a mechanical switch operated by the movement of the Brake pedal.
Thus, if one system fails, the other, hopefully, works. Pretty easy to
isolate problems. See my writeup on the Technical page of my site. Go to the
"My Modifications" section on the Technical Page.

John Sims, BN6
Aberdeen, NJ
 
http://www.healey6.com



-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of john close
Sent: Sunday, June 07, 2009 7:50 PM
To: Healeys
Subject: [Healeys] BN6 Tail Lights

Hello Listers - Mine have decided to stay on, regardless of light switch
position, when ignition switch is on. 3rd brake light stays on too. Lights
don't get brighter when brake pedal is pushed. Turn indicators work.
 Suggestions, please? Thanks - JRC
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as ahbn6 at verizon.net

http://www.team.net/archive