[Healeys] Stalling Problem

[tld6008 at mchsi.com]

 HMMM interesting fix

--
Tim Davis BN7 
  -------------- Original message from "Rod Shepherd" <rodshepherd at optusnet.com.au>: --------------


> Good afternoon,
> Charlie, I had a similar problem not that long ago.
> The fix was to remove the white wire with a black trace from the CB
> connector of the coil.
> Have not had a reoccurrence since.
> Rod.
> 
> -----Original Message-----
> From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
> On Behalf Of Charlie O'Connors
> Sent: Friday, 5 June 2009 11:51 AM
> To: healeys at autox.team.net
> Subject: [Healeys] Stalling Problem
> 
> Took my Healey for a drive this evening and within about 1/2 mile, it began
> sputtering so I pulled off to the side of the road and it stalled.  I had a
> similar problem a few months ago and found I had a loose coil connection.
> So I thought that may be the problem this time as well.  I unplugged/plugged
> the coil cable and checked the other cables.  I started the car and let it
> idle for a few minutes and all seemed OK.  Put the hood down and took off.
> I got maybe 500 yards and it did the same thing.   I appear to be getting
> fuel to the engine - gas gauge says 3/4 full.  Any thoughts on what would
> cause this would be appreciated as I'm hoping to take a road trip this
> weekend.
> 
>  
> 
> Charlie
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> You are subscribed as rodshepherd at optusnet.com.au
> 
> http://www.team.net/archive
> _______________________________________________