[Healeys] BJ8 Glovebox Question

[tomfelts at windstream.net]

That's not the problem.  It works like a charm.  the problem is when I mount it flush with the door, it is squeezed so much that it can't move.  Loosening the front knob allows it to move freely but then I have a loose lock.  I have added a rubber spacer under the front knob and now it works nicely.  I was wondering if there was a spacer under it originally.

Thanks
tom 
---- 63ahbj7 <63ahbj7 at comcast.net> wrote: 
> <<A (small) shot of graphite powder into the key slot is perhaps 
> better.  Grease will eventually attract dust and dirt and get 
> gunky--could stop the tumblers from falling properly. >>
> 
> Bob is 1000% correct, Tom.  Better take it apart & clean - again<G>!!
> 
> Ed
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> You are subscribed as tomfelts at windstream.net
> 
> http://www.team.net/archive