[Healeys] Gas gauge sender unit

[Bob Yule]

    First you need to make another hole in the float.  This will enable you 
to get the gas out that is in it.  If you blow into the hole that you make 
then the gas will come out of the original hole.  When the float is empty, 
if its plastic, use a soldering iron to seal both holes.  On a metal unit 
use the soldering iron to solder the holes shut. Other units are available, 
one is from a Ford Pickup I believe and it is tin.
Cheers.......Bob
Check out our web site www.autofarm.net
----- Original Message ----- 
From: "John Sims" <ahbn6 at verizon.net>
To: "Healey List" <healeys at autox.team.net>
Sent: Saturday, July 18, 2009 1:42 PM
Subject: [Healeys] Gas gauge sender unit


> Any secrets on how to find a leak on the sender unit float? Mine is full 
> of
> gas. Can I buy just the float anywhere? If not, how do I locate the leak 
> and
> what do I use to patch it.
>
> John Sims, BN6
> Aberdeen, NJ
>
> http://www.healey6.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as autofarm at cyg.net
>
> http://www.team.net/archive


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.387 / Virus Database: 270.13.19/2245 - Release Date: 07/18/09 
05:57:00