[Healeys] Plastic Replacement Fuel Pump - BN1 / BN2 ?

[Oudesluys]

I found one in my boxes of old junk/spares. It has written on it: "Auto 
Pump, made in New Zealand".
It has spade pos and neg terminals.
It should be fitted to a bracket with 2 small bolts.
Fuel lines are fittied using either banjo fittings ur plumbed in lines.
It works like a Lucas fuel pump and also looks a bit like it. It is 
solid state.
I could not find any reference when Googling.
Kees Oudesluijs
NL



Alan Seigrist schreef:
> All -
>
> I'd like to get one of those semi-generic plastic SU pump copies for my BN1
> to carry as a spare in the boot.  Since all my fuel pump connections are
> original I don't want to deal with a FACET pump or something like that.
>
> Does anyone know where to get one of these plastic pumps which will fit in
> the original pump housing for my BN1?  I recall at one time they were quite
> common as that fuel pump was used on lots of LBCs int he 50s.
>
> Thanks,
>
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs at chello.nl
>
> http://www.team.net/archive
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.387 / Virus Database: 270.13.9/2228 - Release Date: 07/09/09 18:07:00