[Healeys] Alloy -Chrome Rocker (Valve) Cover

[Eric (Rick) Wilkins]

As far as  know, the original six cylinder alloy cover looks similiar  
to the one fitted to my car, but looked a little narrower on top.

Here's my modern repro:
http://www.ewilkins.com/wilko/engine.htm

Wilko
San Diego

On Jul 4, 2009, at 7:15 PM, Jim Lyons wrote:

> Hello All,
>
> The Originality Guide states that  "chrome valve covers were available
> exchange from the Donald Healey Motor Co."
>
> Were these covers available from the factory for the BJ8 in 1966 or  
> just for
> the early 100 cars ?  Can anyone point me to a photo of this
> original chrome cover ?   Do any of the parts suppliers offer a good
> reproduction of this cover that was available from the Donald
> Healey Motor Co. ?
>
> Thanks,
> Jim
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as e-wilkins at cox.net
>
> http://www.team.net/archive