[Healeys] Alloy -Chrome Rocker (Valve) Cover

[Ray Juncal]

Jim / John
   The finned alloy covers were an after market item never available from the
factory.  I believe they were a U.S. made item and sold thru accessories
suppliers such as MG Mitten or Hahn something??  I make a similar finned valve
cover for both the four and six and have replacement parts. ( knobs & logo
plates ) Have a look at my web page.  <healeyray.com>
Regards
Ray Juncal
--- On Sun, 7/5/09, John Harper <ah at jharper.demon.co.uk> wrote:




Jim

I don't know about later cars but on the 100 it was simply the original,
chrome plated. I had an original on my BN1 but have recently had to have
it re-chomed because it was peeling. The special hollow fixing nut heads
are also chromed.

To the best of my knowledge the cast ribbed cover that many fit to their
cars was not supplied by the Donald Healey Motor Company.

Regards



>
>The Originality Guide states that  "chrome valve covers were available
>exchange from the Donald Healey Motor Co."
>
>Were these covers available from the factory for the BJ8 in 1966 or just for
>the early 100 cars ?  Can anyone point me to a photo of this
>original chrome cover ?   Do any of the parts suppliers offer a good
>reproduction of this cover that was available from the Donald
>Healey Motor Co. ?
>
--
John Harper