[Healeys] BJ8 Rubber anti rattle for bonnett installation

[George Haywood]

Wes,

Here is a picture of my completed engine bay.  You can see where the buffers
go and the molding strip on the left side by the carbs can be ordered from
anywhere but I got mine from British Car Specialists.  It came in the proper
length I believe--just slide it over the lip and you're good to go, but
somewhere in the archives is the length (somewhere around 36-37").

George



> From: westonkeyes at hotmail.com
> To: healeys at autox.team.net
> Date: Tue, 27 Jan 2009 14:00:48 -0500
> Subject: [Healeys] BJ8 Rubber anti rattle for bonnett installation
>
> Hello Folks,
>
> I'm installing the rubber anti rattle pieces for the bonnet on a BJ8.
>
> Also: How many per side? I see three holes on the right side and 2 on the
> left. I assume there is none in the middle of the left side because of the
> mounding to keep water away from the carbs. Could someone tell me where
that
> moulding extends to as well.
>
> Wes Keyes
>
_________________________________________________________________
Windows Live Hotmail.more than just e-mail.
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_hm_justgotbetter_howit
works_012009

[demime 1.01d removed an attachment of type image/pjpeg]