[Healeys] thermal Choke Change-over

[Editorgary at aol.com]

In a message dated 1/26/09 8:47:03 AM, healeys-request at autox.team.net writes:


> Nope and confirmed by chassis and body number plates which indicate car was
> built before they were used
> Richard of KY
> BN7 440
> 
Actually, the change numbers aren't exact. The change began in November 1959 
at e. 29D/6369 intermittently, and by e.29D/6395 all engines had the new carb 
system. The parts manual indicates that the change in the interior was made on 
the BN7s at C.5235 , but my car is HBN7L5229 and it has the choke installed 
in the dashboard. Apparently the change to carbs and interior was made before 
they had used up all old engine blocks, however: my engine does have a blanking 
plate on the engine block, where the thermal sensor would have gone. This is 
why I know that they were still using the old engine blocks when they made the 
change-over in the carb and choke set-up.
Cheers
Gary



**************
A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100000075x1215855013x1201028747/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=De
cemailfooterNO62)