[Healeys] Heat insulation

Ghess4 ghess4 at cox.net
Fri Jan 16 20:29:48 MST 2009


Hi Rich,
Thanks again for sending the pictures of your insulation panels.  That is 
the way I will go.   As many others are, I'm sure, I'm very grateful for 
your expert help and learn a great deal from your responses to others 
questions.
Gale Hess
----- Original Message ----- 
From: "Rich C" <richchrysler at quickclic.net>
To: "Ghess4" <ghess4 at cox.net>
Sent: Thursday, January 15, 2009 7:18 PM
Subject: Re: [Healeys] Heat insulation


> Hi Gale,
> Here's the latest job I've been assembling, showing the early stages of
> inner detailing, including the insulation panels. This is a '64 Phase 1 
> BJ8.
>
> Rich
> ----- Original Message ----- 
> From: "Ghess4" <ghess4 at cox.net>
> To: "Rich C" <richchrysler at quickclic.net>; <healeys at autox.team.net>
> Sent: Thursday, January 15, 2009 1:38 PM
> Subject: Re: [Healeys] Heat insulation
>
>
>> Thanks Rich,
>> I've put a new frame under my BJ8 and after sand blast, undercoat and
>> paint it looks so good that I hate to cover it up!!  Guess I'll just 
>> drive
>> it without the outer panels!!  (ha)  I've used the stuff that looks just
>> like the asbestos but it doesn't look professional to me no mater how 
>> good
>> I fit the panels around the foot well.
>> Thanks again.
>> Gale Hess
>>
>> ----- Original Message ----- 
>> From: "Rich C" <richchrysler at quickclic.net>
>> To: "Healeys" <healeys at autox.team.net>; "Ghess4" <ghess4 at cox.net>
>> Sent: Wednesday, January 14, 2009 7:27 PM
>> Subject: Re: [Healeys] Heat insulation
>>
>>
>>> Asbestos insulating panels were used on the engine side of the left
>>> footwell right from the earliest preproduction Hundreds.
>>> The earliest were somewhat smaller and didn't cover as well, but were
>>> there never the less.
>>>
>>> Rich Chrysler
>>>
>>> ----- Original Message ----- 
>>> From: "Ghess4" <ghess4 at cox.net>
>>> To: <healeys at autox.team.net>
>>> Sent: Wednesday, January 14, 2009 8:17 PM
>>> Subject: [Healeys] Heat insulation
>>>
>>>
>>>> Can anyone tell me whether the insulating panels on the foot well in 
>>>> the
>>>> engine compartment were installed on the early healeys or was that
>>>> something
>>>> that was added later?
>>>>
>>>> Thanks
>>>> GHess
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>>
>>>> Healeys at autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>
>>>> You are subscribed as richchrysler at quickclic.net
>>>>
>>>> http://www.team.net/archive


More information about the Healeys mailing list