[Healeys] wiper gear box

[Oudesluys]

What ever way you fit the boxes do not forget to turn the cam wheels 
180: so that you can use the unworn part of the cam wheels. Lubricate 
with grafite grease or MoS2 grease.
Kees Oudesluijs

Warthodson at aol.com schreef:
> John, et all,
> I am referring to the two gear boxes that pass thru the shroud and the  wiper 
> arms atttach to them, not the gear in the motor assembly. The parts  book 
> indicates that the cable is above the gear, but I would like to verify this  
> because I am helping a friend re-assemble a BJ7 & his is a very tight fit  when 
> oriented this way, perhaps because the tubing around the cable was badly  bent. 
> It seems to fit slightly better with the cable below the gear.
> Thanks,
> Gary
>  
>  
>  
> In a message dated 2/9/2009 10:04:14 A.M. Central Standard Time,  
> loftusdesign at cox.net writes:
>
> Gary,
>
> The Gear is below the cable. Here's a few pictures to show  the assembly  ..
>
> http://www.loftusdesign.net/wiper3.jpg
> http://www.loftusdesign.net/wiper4.jpg
> http://www.loftusdesign.net/wiper5.jpg
>
> Cheers,
> John
>
> -----------------
>
> When  correctly installed, is the gear (in the gear box) above or below  the  
> actuating cable (on a BJ7)?
>
> Gary  
>
>
>
> **************A Good Credit Score is 700 or Above. See yours in just 2 easy 
> steps! 
> (http://pr.atwola.com/promoclk/100000075x1218550342x1201216770/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=fe
> bemailfooterNO62)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs at chello.nl
>
> http://www.team.net/archive