[Healeys] wiper gear box

[Warthodson at aol.com]

John, et all,
I am referring to the two gear boxes that pass thru the shroud and the  wiper 
arms atttach to them, not the gear in the motor assembly. The parts  book 
indicates that the cable is above the gear, but I would like to verify this  
because I am helping a friend re-assemble a BJ7 & his is a very tight fit  when 
oriented this way, perhaps because the tubing around the cable was badly  bent. 
It seems to fit slightly better with the cable below the gear.
Thanks,
Gary
 
 
 
In a message dated 2/9/2009 10:04:14 A.M. Central Standard Time,  
loftusdesign at cox.net writes:

Gary,

The Gear is below the cable. Here's a few pictures to show  the assembly  ..

http://www.loftusdesign.net/wiper3.jpg
http://www.loftusdesign.net/wiper4.jpg
http://www.loftusdesign.net/wiper5.jpg

Cheers,
John

-----------------

When  correctly installed, is the gear (in the gear box) above or below  the  
actuating cable (on a BJ7)?

Gary  



**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100000075x1218550342x1201216770/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=fe
bemailfooterNO62)